You've plunged, plunged again, and the bowl still just sits there when you press the handle. Before you try a third time, press the handle and feel how it moves. If it goes down with no resistance and nothing happens, the chain or another connection inside the tank has most likely come loose, and the flapper won't lift. If your toilet won't flush and the handle feels slack, 🎟️ schedule a toilet repair visit with 247 Florida Plumbing.

A flush that runs but leaves the bowl half done is a different problem. Lime and calcium from hard water can build up under your toilet's rim and clog its jets, the siphon jet included, and a flapper that closes too fast lets too little water into the bowl.

Now look past the toilet. If the tub or a sink backs up at the same time, that points to the shared main line, not a clog at each fixture. It also explains the plunger not working on your toilet: neither a plunger nor a bottle of drain cleaner at one fixture reaches a main-line blockage, and harsh chemicals can damage older pipe. Until the line is clear, stop flushing and don't run water, since every flush or load adds to what comes back up. If you're a senior, 🎟️ here's our senior citizens discount for the visit.

Press the handle first, then watch the tub and sinks the next time you flush. If they back up, keep children and pets away from the sewage, wear rubber gloves for anything it touched, and wash your hands right after. Then 🎟️ book a visit with 247 Florida Plumbing or call us. We'll Take It From Here.